Smart & High speed PET bottle blow molding machine for water
1. Machine description
Full automatic blow molding machine is suitable for producing
PETplastic containers and bottles in all shapes. It is widely used
to produce the carbonated bottle, mineral water, pesticide bottle
oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
2. Features of main body :
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity
5). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
7). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links
to lock the mould.
9). Two ways of operating: automatic and manual.
10). Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process.
11). Ideal cooling system make the finished bottles without any
Want to know more message , contact us with out hesitate ! Inquiry
us now !
3. Machine model details
|Max bottle height(mm)||328||328||300||...|
|Max bottle diameter(mm)||105||105||75||...|
|Bottle neck size(mm)||20-25||20-25||20-25|
|Max preform length(mm)||150||150||140||...|
4. What you can get from our machine
1) Up to 45% less by heating
In our blower, preform distance is only 38mm, with fewer lamps, you
can heat more preforms.
2) Up to 20mins change mould
What if you change mould like open&close a drawer?
With our special quick-mould-change design, mould can find position
itself. And be changed within 20mins.
3) Up to 30% less by air
The machine is fully driven by servo motor, no need low pressure
We also decrease the dead volumn in the blowing station to reduce
high pressure air consumption.
4) Up to 80% less maintain cost
Changing new air cylinders and steal rings is main maintain cost in
blower. We adopt servo motors, it is more reliable and almostt no
need maintain cost.